gear won't up-shift till 47 mph. There is a vacuum modulator valve on the transmission, that has a small hose to the intake manifold at the top. This is used to move the shift points up or down, based
...gear. Early model ZF series are rather fragile, AW70 and AW71 series are more robust, and AW72 series transmissions are among the most stout in production at the time. Always ensure that the ...
...shift lever back to "1" then move up to "2" then finally "D"? I think those old ATX transmissions had a governor that can be changed from the top of the trans without removing it. I think it is held ...
gear and needs a rebuild. Any comments or thoughts of what to check before laying out the money for a rebuild? I've seen a similar issue on other transmissions where the shifter slips out of the slots
...remove the gear shift lever bowl. Remove the shift bowl shroud and bowl lower bearing. Unhook and remove the dimmer switch actuating rod. Remove the attaching nut and remove the dimmer switch. Remove ...
...remove switch retaining screws and switch. Reverse procedure to install, noting the following: Place gear shift lever in neutral. Place lock cylinder and switch in positions noted in steps 3 and 4. ...
...S OUT OF EACH FORK. 16 SLIDE THE GEAR SHIFT FORK SHAFTS BACK AND REMOVE THE FORK/S this process is for the W series 5 speed tranny other W series trannies use similar procedures. I hope this help, ...
...it is stuck between gears Remove the top cover of the trans (refer to service manual) and inspect the shift rails for freedom of movement or any broken parts, you may have a broken shift rail
150 questions posted
Usually answered in minutes!
223 Questions
114 Questions
78 Questions
124 Questions
116 Questions