1997 Mercury Mountaineer "front wheel drive half shaft" Questions

Ad

...wheel drive and I'm removing the front driver side axle. remove the brake caliper and rotor then undo the axle nut and disconnect the lower ball joint and separate from the spindle assembly. pull the ...

Ad

Question about Mercury Mountaineer

2 Answers

wheel drive variations. This couple controls the power distribution between the front and rear wheels. This couple may fail and can cause the binding your speaking of because it will lock in place and

Ad

Question about Cars & Trucks

1 Answer

...front wheel drive While up on the hoist both main drive shafts are turning but no out put from front half-shafts.Can see crown wheel turning trough filler plug hole but nothing going to front wheels. ...

...front wheel area when truning wheel to the right when slowly backing up or pulling forward? Clunking noise seems to occur when car has set for a while. If its a front wheel drive more then likely its ...

Question about Mercury Mountaineer

2 Answers

wheel drive is different part # as well THE MAKER OF THESE PARTS AND (ALL ARE STILL AVIL) IS "A-1 CARDONE" CARDONE SELECT Part # 663092 {[CV Half-Shaft Assembly] New} Front Left; AWD w/A.T. or FWD $50

...front hub removed from my '89 dodge ram 50 4wd to replace the half shaft. Please help! right or left side? Use 3 wheel nuts in order to attach the J 42129 to the wheel bearing/hub. Use the J 42129 in ...

Question about Mercury Mountaineer

1 Answer

front wheel hubs to the front half shafts or disengage the front wheel hubs from the front half shafts. The IWE solenoid receives engine vacuum from the vacuum reservoir. When the 4-wheel drive system

front wheel hubs to the front half shafts or disengage the front wheel hubs from the front half shafts. The IWE solenoid receives engine vacuum from the vacuum reservoir. When the 4-wheel drive system

Question about Mercury Mountaineer

1 Answer

front wheel hubs to the front half shafts or disengage the front wheel hubs from the front half shafts. The IWE solenoid receives engine vacuum from the vacuum reservoir. When the 4-wheel drive system

...from the right front of the vehicle dDronin If your vehicle is front wheel drive it may be the half shaft. If when you turn at slow speeds and hear a clicking sound it definitely is the half

Not finding what you are looking for?
1997 Mercury Mountaineer Logo

569 questions posted

Ask a Question

Usually answered in minutes!

Top Mercury Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...