2004 Jeep Liberty "change rear lower control arms" Questions

Ad

...rear right. Has vibration and howl at low speeds and worse at deceleration from high speeds. All seems tight and secure in front end. Front wheels seem tighter than back, no play. Drive 25 kms daily ...

Ad

...change the lower control arm bushing on a 1998 Buick Century? I printed out the detailed dealer directions from the public library and it says I need to remove the whole lower control arm. Is this ...

Ad

change my rubber bushings on the front suspention of my 1997 dodge ram 1500       opper Control Arm Bushings To access the upper control arm, remove the shock absorber and the

...rear lower control arm, remove the 2 bolts holding the arm in place and install the new control arm. An alignment is recommended when changing any part of the suspension, especially control arms, tie ...

Question about Jeep Liberty

1 Answer

...change lower control arm bushes Lift Vehicle and place on axle stands. Remove wheels. Disconnect the lower control arm from the bolts that hold the ball joint, or from the knuckle. Undo the rear two ...

Question about Jeep Liberty

1 Answer

...change out my rear end remove wheels calipers and rotors, remove rear cover and drain oil from diff, remove abs sensors if it has abs,remove axle shafts, this is done by removing the 8mm bolt holding ...

...rear recall done by dealer,,, alignment ,,,jeep drifs to the right dealer did recall on lower control arms ,,,,drifts to the right of road,,,, 32,000 miles was PERFECT - STRAIGHT AS A ARROW ,,,, ...

Question about Jeep Liberty

1 Answer

...rear shaking and grounding hello, since i've put lowering coil springs on my 95 life is like hell it's grounding over 50 mph in each gear i have even bought a set of adjustable lower arm,new ...

...lower control arm attaches to the front end of the torsion bar. The rear end of the torsion bar mounts on an adjustable arm at the crossmember. This arm adjustment controls the vehicle trim ...

change rear coil spring on 2009chevy traverse You are first going to have to support the lower control arm that the spring is mounted to. Start by removing the wheel, then disconnect the lower control

Not finding what you are looking for?
2004 Jeep Liberty Logo

1,144 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2002 Jeep Liberty
2002 Jeep Liberty

1,658 Questions

2005 Jeep Liberty
2005 Jeep Liberty

839 Questions

2003 Jeep Liberty
2003 Jeep Liberty

768 Questions

2006 Jeep Liberty
2006 Jeep Liberty

633 Questions

Top Jeep Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...