2003 Chrysler Town & Country "gas tank vent valve" Questions

...gas cap. Filling the fuel tank with the engine running could conceivably cause this code as well or if the cap wasn't properly tightened. Any of the following could also be the cause: A small leak in ...

gas tank to the charcoal canister and up to the engine. It also checks to make sure the gas cap is sealing correctly. When you fill your car with gas, the vapors in the tank get forced into a canister

the town & country. Could it be the same problem? Gas cap tight? A small leak in any of the EVAP hoses or fuel tank hoses A small leak in the purge valve or vent valve The EVAP Canister may be leaking

...gas cap EVAP Large Leak Detected Possible Causes: EVAP purge solenoid is damaged or it has failed Fuel tank cap is damaged, missing or the wrong part number NVLD switch is damaged or it has failed I ...

...gas leaksalso Fuel tank venting is handled by the EVAP system, which includes a vent valve (on the cross-member to the rear of the tank), a canister (behind left rear wheel), a purge valve (on the ...

...gas tank of car. Gasoline seems to back up in opening of tank even at the slowest speed of pump. There is a vent valve located near the fuel tank. The vent valve is part of the EVAP emission system. ...

gas tank 1999 Olds Alero, runs on unleaded gas. Am having problems with pumping gas into tank. I removed two lines from the gas spout to the tank - both were clear no obstructions found there. I still

gas tank on Subaru Forester? It shut off as if the gas tank is full . the vent control valve on the charcoal canister is clogged or stuck preventing the air to escape from the gas tank causing the gas

...gas tank the gas pump kicks off unless I trickle in the gas. Takes about 10 minutes to fill 18 gallons of gas. What is the fix? Fuel tank vent hose damaged, kinked, or bent. Fuel tank vent valve is ...

gas tank venting issues gas tank is pushing suvere pressure thru gas cap. Its not venting rite. Something is building pressure in tank run fault codes and look for problems in the canister venting ...