2002 Chrysler Town & Country "antifreeze coolant leaking turn air" Questions

...antifreeze but no visible leaks and none in engine oil. Also heater blows cold. Could thermostat be causing it to blow it out of overflow tube? Hello, you may be right on the money. How to test the ...

...indicate a blown head gasket and the reason you are losing antifreeze. If there's no bubbles, and the coolant level stays full, put the radiator cap back on and see if the heater is working

...coolant level in the radiator and reserve tank. Check your owners manual for antifreeze type and mix ratio with water. Buy the 50/50 premix, it's easier, but yes there must be a leak somewhere. Make ...

...You may have to do this a few times until all air is out of the system and overflow stops spitting antifreeze. I HAVE A 1997 ALERO OLDSMOBILE AND I DONT  NO COOLANT CAP COME WITH THIS ...

...coolant & have no air in the system you need 50/50 antifreeze and water in the cooling system.water boils at 212 degrees that why you need to add antifreeze raise boiling point up to 260 ...

...antifreeze, and when it gets bad enough, it will fog up your windows. This is usually a big job, as a lot of the dash must be removed to get at the heater core, although I'm not sure how difficult it ...

...antifreeze. After looking around, I have a hose just hanging but it mainly only leaks when I turn the car off. Does anyone know where I can find a Coolant Hose Diagram? Also need a diagram showing ...

...antifreeze. i have an idea about the air conditioning... you most likely have a coolant leak. not enough coolant in your car. or your coolant is old... The A/C has nothing to do with the car over ...

...COOLANT LEVEL.MAKE SURE YOU HAVE 50/50 ANTIFREEZE AND WATER.MAKE SURE COOLING FANS COMING ON WHEN ENGINE REACHES 190 DEGREES.TO SEE IF COOLANT FANS RUNNING TURN ON CAR AIR CONDITIONER TO SEE IF FANS ...

...antifreeze? You block heater is a heater that should be screwed into the engine block. Yes, it can leak. You might need a new one, or you might need only to replace the gasket on the old one. I'm in ...