2001 Chrysler Town & Country "melted battery post repair" Questions

Ad

...repair, or do I need to take it to the shop? Please help! Thank you so much! Yes you can adjust them yourself. First you need to check that the wiper arms are not bent. If not, remove the cap at the ...

Ad

...battery if switch is smoking with key off. Some wires may have melted them selves together, creating a short in switch. Take into a good shop and have them diagnose and estimate repair. "I hope this ...

Ad

...post from the battery remove the positive post from the + side. then I would suggest cutting the other wires so you can see where you must make new connections. If you just remove them you might ...

Question about Chrysler Town & Country

4 Answers

...battery and got a 12v reading from post to connection. I have never let the car sit this long before and wondering if they may have shorted something changing brake shoes or if the short has always ...

2000 vw jetta alternator won't charge wife's 2000 Jetta 2.0 wouldn't start one day due to dead battery. Battery light never came on so we replaced battery because it was 4 years ...

Question about Chrysler Town & Country

1 Answer

...melted harness, broken connectors, etc. Bad PCM Possible SolutionsIt's always best to do a visual inspection of the exhaust system first. Look for holes near o2 sensors or wiring harnesses coming ...

...battery and no wires look melted or corroded, no sparks arching noted. Honestly I do not know what else to do other than to take it to the dealership and pay $300.00 just to place it on the diagnosis ...

Question about Chrysler Town & Country

3 Answers

...battery disconnect for 5 min, or 2 driver cycles to see if at least the P0170 & P0174 codes are gone. The P0136 & P0156 could be a melted wire as mcneb posted about, this is usually by the ...

Question about Chrysler Town & Country

1 Answer

...battery. I also replaced the light bulb in trunk. It sparked when removing the cover to get to the bulb. Now the dome light and trunk light doesn't work. So I replaced the fuse for the light ...

...Battery 13, Repaired connector on EMC near drivers feet loom by replacing bare wires with connector Insulated type 14, Repaired connector block fitted to EMC under drivers seat, and restore positions ...

Not finding what you are looking for?
2001 Chrysler Town & Country Logo

1,898 questions posted

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...