1988 Honda Prelude "code tdc position sensor" Questions

Ad

Question about Honda Prelude

1 Answer

...Code 8 TDC position sensor, & Code 17 Vehicle speed sensor. Could a transmission problem cause these codes? Any ideas? You need to check the tcm for codes too. The s3 light is like the check ...

Ad

Question about Honda Prelude

1 Answer

...code, and P1362 is a TDC sensor (or crankshaft position sensor) code. The known possible repair is to replace the crankshaft position sensor. You may have to ask for a tdc sensor as some parts ...

Ad

code P1361 and P1362 can relate to a TDC sensor failure, the plug could be dirty or you may need to replace the sensor. Here's a walkthrough:http://www.civicforums.com/forums/115-engine/323984-diy

Question about Honda Prelude

2 Answers

...code with is it "TDC Sensor" intermittent interruption. It could be the CAM position sensor, located behind the timing cover. Here's the info for it: part # 370598 SENSOR ASSY., TDC CYLINDER Retail: ...

...witha p1361 code anybody no what a tdc 1 sensor circuit is TDC top dead center sensor. Tells when the #1 piston is at top dead center position. P1361 Intermittent Interruption In TDC 1 Sensor ...

Question about Honda Prelude

1 Answer

...code 8 on a 89 crx TDC (Top Dead Center) position/crank angle sensor or circuit Problem. That's what Honda calls it. Part stores will call it a CRANK POSITION SENSOR. P.S. The Sensor itself is ...

...TDC sensor?.. the crank position sensor? If so, on the four (4) cylinder, it's located behind the timing belt cover at the crankshaft.. if it's the 2.5 V6, it's located behind the LH exhaust manifold ...

Question about Honda Prelude

1 Answer

...TDC) Sensor) Intermitten interruption or Top. Please what does this mean and what should i do? It sounds to me like a timing issue. Did you recently have the timing belt changed on the car? If not, ...

...code or codes send them to me and I'll fix your Accord...Guru...saailerHonda Codes p1 O2A - Oxygen sensor #1 2 O2B - Oxygen sensor #2 3 MAP - manifold absolute pressure sensor 4 CKP - crank ...

...code before I done work. Now getting p1361 and comes right back. P1361 = Camshaft Position (CMP) Sensor A (Top Dead Center (TDC) Sensor) Intermittent Interruption,or Top Dead Center (TDC) Sensor ...

Not finding what you are looking for?
1988 Honda Prelude Logo

186 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Honda Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...