2001 Cadillac Catera "need spark plug wires" Questions

...spark plugs my need to be changed? Sometimes this happens when a spark plug wire goes bad or works loose. Check that all the spark plug wire connections are secure (both ends). To zero in on a ...

...need to replace the coil pack that runs from the spark plugs ,and the plug wires end up at it.It also may be the spark plug wires,get a water bottle and spray the wires after dark and if you get a ...

...spark plug wires are marked. I always thought #2 was on front passenger side of motor on V6 and V8's. Motor is still skipping and running rough, are plug wires labeled correctly? Parts for this car ...

...spark plug cover? I need to buy a special socket that will be able to remove the spark plug cover on the left and right side of the engine for 2000 cadillac catera. They are starhex head bolts that ...

...SPARK PLUG/CYLINDER LOCATED? #2 misfire and i need to know where #2 resides on the engine. opel made engine (german made) Change all of the spark plug wires one at a time and label them so that you ...

...spark plug wires, distributor cap, and rotor (if applicable). Otherwise, check the coils (a.k.a. coil packs). In some cases, the catalytic converter has gone bad. If you smell rotten eggs in the ...

spark plug wiring harness from the ignition coil. Detach the electrical connection from the ignition coil. Remove the bolts from the ignition coil, and remove the coil. To install: Installation is the

...need...1-3-5 or 2-4-6. They are bolted on top of the engine over the spark plugs. The right side (as viewed from the front) coil pack requires moving some other parts to get to it. We are talking ...

...spark plugs check cap and rotor, if not that, check ign. module and coil. it is problem with ignition module, or wire of module, or cam sensor. if you have a sensor then first replace that it is easy ...

...spark plugs? Remove coil pack (1 per side) and marked cyl 135 on one head and 246 on the other, long strip about 2 inches wide and 10 inches long all cast epoxy. At the very back there is a connector ...