2002 Acura 3.2TL "key fob" Questions

...key fob,not the key,and then you need to put the key in the ignition and start it,if you dont have your key fob,call your car dealer to get a new one,they are programmed for each car only,you cannot ...

...key fob disabled We are restoring a flood car and the main fuse box was the only thing that needed to be switched out. The wire-harnesses and engine are still in mint condition. After we changed out ...

...FOB turn the ignition key off.Now turn the ignition key on again and press either button on the FOB. Turn the ignition off again. Do this 3 times. This initiates programming for the power door locks. ...

...key fob? if so that will reset it. just press unlock. If you dont an dits not a OEM Acura alarm you will need to find who makes it and get a new key fob, or have a shop that does alarms to disconnect ...

...ign won,t turn to off w/trans in park When transmission is off and the gear is on park, press the key downward as if you are just inserting it into the fob. This way the key will come out. Good

...key and remote FOB. I purchase two keys online and now need to get them cut and program. Can I simply get them cut at any key cutting shop and is there a way I can program them myself? I have been ...

key fob or the push button on the door panel. The switch is to the on position in the glove box... When i press the button on the key fob i hear a click like a relay or a solenoid behind the glove box

anti theft red light flashing car will not start Key the battery in the key fob as the immobiliser may not be getting the signal

...key fob not work. when key turned in ignition, nothing. No lights, radio, click. completely dead. What could the problem be? Battery cables ? Hard to say for sure Cassandra ,Would need to do so ...

...key fob or pushing the button on the door panel. It is on both the passenger side and the drive side. The locks are controlled though a central module, it needs to be scanned to see why the locks are ...