1996 Acura TL Series "brakes piston" Questions

Ad

I can't collaspe the rear brake caliper to remove the brake Pads I release the emergency brake and loosened the filler cap on both brake fluid resevoirs and I still cannot collaspe the rear caliper. ...

Ad

How do i replace rear brake pads? And check condition or rotors? The piston brake pad assembly is usually held in place by two bolts that face the car. Remove these and tap the assembly off .Hang the ...

Ad

Brakes are sticking and hesitating on take off. Heats up and then it gets worse as you barely tap to come to a stop. Jerking motion-it's almost sticking after stopping and then upon ...

Question about Acura TL

1 Answer

...brakes for some time and paid for repairs. I have two Acura's and wanted to know if there are special tools required and if there is any documentation and where that would assist in the replacement. ...

...brakes. You basically take the wheel off. Unbolt the two screws holding the caliper on. Support the caliper. Take the old pads out. Put the new ones in (with brake lubricant). Push the piston back in ...

2006 ford 500 can not get rear brake pads on. tried c-clamp and piston will not move sounds like you will need to replace the caliper. Try opening the Brake Bleeder when you use the C clamp. Some of ...

...brakes. Piston will not retract when you release brake lever. The brake hose is clogged.  When under pressure from applying breaks, the piston is forced tight to the rotor. When released the ...

need help changing brake pads and routers on 2003 need help changing brake pads and routers Remove brake fluid from the master cylinder brake fluid reservoir until the reservoir is approximately 1/2 ...

Question about Acura TL

2 Answers

...USE THIS PROCEDURE FOR THE REAR BRAKES IT IS NOT THE SAME ONLY FRONT BRAKES for the rear if you have calipers instead of drum brakes you have to turn the piston in at the same time as pushing ...

...PISTON IN BORE.PLACE MASTER CYLINDER RESERVOIR COVER BACK ON.WHEN FINISHING REPLACING BRAKES.PUMP BRAKE PEDAL UNTIL BRAKES FEEL SOLID AND FIRM CHECK BRAKE FLUID LEVEL.DONT DRIVE VECHICLE IF BRAKES ...

Not finding what you are looking for?
1996 Acura TL Series Logo

478 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2000 Acura TL
2000 Acura TL

424 Questions

1999 Acura TL
1999 Acura TL

415 Questions

2004 Acura TL
2004 Acura TL

357 Questions

2003 Acura 3.2TL
2003 Acura 3.2TL

278 Questions

Top Acura Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you an Acura Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...