1994 Jeep Grand Cherokee "rod fuse" Questions

Ad

Question about Jeep Grand Cherokee

1 Answer

...to "open" and pull on the rear door handle. with the flashlight you will be able to see or feel the rod moving. pull up on this rod. After you get the door open spray some lube on the lock mechanism ...

Ad

Question about Jeep Grand Cherokee

1 Answer

no spark 99 JEEP GRAND CHEROKEE 4.0l HAD NO SPARK CHANGED COIL ROD CRANKSHAFT POSITION SENSOR AND STILL NO SPARK Check the asd relay in the fuse block. Replace it with a known good relay

Ad

fuse out and put panel back in. that should disengage the alarm... sounds like someone used a slim jim and knocked the rod that disengages the alarm from the drivers door. or the switch is bad and not

Question about Jeep Grand Cherokee

1 Answer

...fuse to check and what other things I should look for. you can check all the fuses with a test light,you should also check the brake switch with a test light to make sure power is going through the ...

Question about Jeep Grand Cherokee

2 Answers

...fuse the best thing to do is hook it up to a scanner.There are a number of things it could be...coil pack,ignition switch,relays ect... Process of elimination can get very expensive.you can rent a ...

Question about Jeep Grand Cherokee

1 Answer

...neither of these fixes work then you need to check the motor wheel that connects to the wiper arm rods under the vents where the washer lines run down from the arms... sometimes the pins that ...

Question about Jeep Grand Cherokee

1 Answer

...no power The driver seat front/back motor had frozen up and I freed it up by manually turning the rod which is turned by the motor and it worked for another couple of years. But then both seats

Question about Jeep Grand Cherokee

1 Answer

fuse or relay issue? I have checked each but I am an amateur. This may be the straw that breaks the Jeeps back. I have oil vanishing, a hole in the manafold, the driver side mirror has water in it and

Question about Jeep Grand Cherokee

5 Answers

...rod that the brake pedal is attached to, and held on by a bolt & nut. Disconnect any plugs or wires attached to it, and remove the mounting hardware. Replace the switch, reconnect hardware and ...

...rod on my 1994 v8 jeep grand cherokee larado but the car wont start .. this all comes after runnin out of gas. its almost wasnts to but doesnt stay on at times and now won ive changed the map sensor ...

Not finding what you are looking for?
1994 Jeep Grand Cherokee Logo

2,884 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Jeep Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...