Question about Jeep Grand Cherokee
Ignition switch won't release key when it is put in park. But when I removed switch and key tumbler, the key tumbler/cylinder releases key. Why won't the key release when it is in park? ...
wont shift into park the whole way and not able to remove key because of this My 1998 does this. It may be the cable from the Transmission Selector to the Steering Column. I have not yet "cured" this,
...for access to
the shift cable adjustment. (Refer to 23 - BODY/INTERIOR/
FLOOR CONSOLE - REMOVAL)
(3) Loosen the shift cable adjustment ***** (Fig.
110).
(4) Raise vehicle.
(5) ...
...REMOVAL: The parking lamp is mounted on the side of the GOR next to headlamp assembly. Open hood. Remove screws attaching the parking lamp to the GOR. Rotate lamp socket counterclockwise and pull ...
94 jeep grand cherokee limited locked rear brakes i believe it is most likely the parking brake part of brake system locking up. i can move the vehicle forward but not in reverse i even tried pullin ...
...parking light housing retaining screws ... ... then pull the housing away from the vehicle far enough to remove the bulb socket from behind the housing. Turn the socket counterclockwise and pull Push ...
...parking light housing retaining screws ... ... then pull the housing away from the vehicle far enough to remove the bulb socket from behind the housing. Turn the socket counterclockwise and pull Push ...
Replace Parking light bulb How do I get the drivers side front light assembly out to change the center parking light bulb on a 2004 jeep cherokee ? here is a link to removing that assembly ...
how do you remove right parking light behind the light u should be able to see acouple of nuts that hold the parking light take them off pop the case off then take the light off
...the bulbholders out to replace the park or turn signal bulbs. Installation is the reverse of the removal
2,884 questions posted
Usually answered in minutes!
3,350 Questions
3,279 Questions
2,899 Questions
2,715 Questions
2,521 Questions
