2003 Lexus Gs 300 "seized door lock" Questions

...What could be the problem? A seized up door lock actuator. You can try freeing it up by spraying a good penetrating oil, my favorite is PB Blaster. If it wont free up you will need to replace

...door lock cylinders may seize due to lack of use if using the key fob. You can use WD-40 and insert the straw into the lock and spray liberaly. Use the key in a sawing motion while applying turning ...

...door panel to replace the actuators. I have done this twice and both times have only gotten about three weeks before a lock up seizure. It is unsafe for my kids as the key fob, the key or manually ...

...you are capable, take the door skin off and pull the lock rod off and see if the key turns, then you know the key cylinder is fine and the lock mechanism is seizing, if not then the cylinder is ...

door panels and spray the lock mechanisms heavily with wd40 or similar.They are common to seize up and do this,also the little spring on the mechanism latch lever rusts and breaks,causing the door not

...door lock will not open with key or power lock all other doors work. I need your advice can it be a fuse? if it was a fuse none of the doors would work.it sounds more like the electric lock motor is ...

...door locks were all seized, I even tried the 200sx as its the same car but a 2 door, same problem. luckily i found out that the 94 nissan altimas have the same door locks so I dismantled the inside ...

...unit for front right door broken found a spare 1 and replaced it.. can't get the door lock working.. Where does the door lock fit onto the swivelling arm for the door handle? lock may be

...DOOR PANELS IT SEEMS TO BE SEIZED WHAT CAN I DO TO OPEN THE DOORS TO BE ABLE TO REPAIR To start, you need to spray something on the seized up parts, WD 40, penetrating oil, ect...and let it sit ...

...Sounds as if the drivers door lock actuator motor is seized/jammed in one direction not enabling the door to unlock. The door will most likely need panel disassembly for ...