1993 Jeep Grand Cherokee "belt 4" Questions

Ad

Question about Jeep Grand Cherokee

2 Answers

belt is loose. would check this and replace if it looks suspect. also timing belts should be changed at a certain time or miles witch ever is the grater. average is 4-6 years on a engine that don't do

Ad

...belt should not push in more than 1/4" or so from the at rest plane You can do a deflection test yourself (rudimentary) by pressing on the longest run of the belt. The belt should not push in more ...

Ad

Question about Jeep Grand Cherokee

2 Answers

...belt. Step 4 Slip off the old belt and slowly release the tensioner pulley. Step 5 Use your belt routing diagram to put the new belt onto all of the pulleys. Pay close attention to the water pump ...

...belt onto pulley's as shown on the diagram along the front of the car/top of radiator. 4) Release tensioner pulley. 2000nissan maxima  car drives looked under hood heard noise and notice twoo ...

Question about Jeep Grand Cherokee

2 Answers

...4. Simply remove old belt and thread new belt on. Simple. Hi Don, It's easy and you won't need a prybar. Get a 14mm or 9/16" socket and a long handled ratchet or breaker bar. For putting the belt on: ...

Question about Jeep Grand Cherokee

1 Answer

...If you dont have the 4.0 (auto belt tensioner) you have to tension using the power steering pump pulley. Thanks for using FixYa - a FixYa rating is appreciated for answering your FREE

Question about Jeep Grand Cherokee

2 Answers

...4 Not really. This happened to me on my Stratus. I replaced the belt and the pulley. All was good. Look for play on the alternator flywheel/pulley. Other than that, you should be fine. Likely not. ...

...4 5 6 | vehicle | | Distributor rotates clockwise ------------ The Spark Plug Gap .035 (In thousandths of an inch) if you replaced the timming belt chances are you didn't get the cam gear and crank ...

Question about Jeep Grand Cherokee

1 Answer

...belt off one of the other more easily accessed Pulleys. 4. DO NOT quickly release the Tensioner, but gently allow the Tensioner to rest in its closed position. Standard Rules for Installing the ...

...belt tensioner on 97 Jeep Grand Cherokee right, for the 4 liter, Loosen the rear power steering pump mounting bolts using a ratchet and 13mm socket or a 13mm box wrench. Loosen the pump upper pivot ...

Not finding what you are looking for?
1993 Jeep Grand Cherokee Logo

2,181 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Jeep Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...