2003 Mercury Mountaineer "turn signal not working" Questions

how do i fix my turn signals on 2002 mercury mountaineer? the hazard lights work fine, but not the turn signals. Its gotta be a fuse. my turn signals are not working and the hazards ?the lights work,

the lights and buttons on stock radio work and other times. they do not. How do I fix this? also my turn signals don't work I have check all fuses. If the fuse is ok then the turn signal switch is bad

...Turn signal switch. What you will need to do is remove the plastic steering column cover and expose the Turn signal switch. The switch itself is called a MFS which means multifunctionswitch. ...

...turn signal on the driver side rear and sides are not working but the signal in the front blinks very fast. It means that your bulb needs to be changed in the rear its simple just open the rear door. ...

turn signal bulb is blinking fast, it is an indicator that a bulb is bad in the system. Replace the left rear turn signal bulb, then see if the left front blinker has gone back to normal. This is most

...turn_signal.jpg Click on the link. See the lite blue wire that carries voltage from flasher to multifunction switch, with the turn signal on, that wire should be hot, use a test light to check for ...

...turn signal won't lit when activate and my brake light also wont also but is illuminate. The Top Brake light do light up when but only when the lights are turned on manual setting if they are on ...

...turn signal switch, but you may have water in a wiring connector or a ground problem somewhere in the back of the truck.The brake light and turn signal circuits go thru the turn signal switch before ...

turn signal and emergency flashers not working on 97 mercury mountaineer 5.0 turn signals and flashers quit working and not sure why Check your fuses first, then go on to the flasher unit. Repost ...