2003 Mercury Mountaineer "brake light fuse" Questions

...fuse runs the brake lights?1998 Mercury Mountaineer. I do not have a fuse box map for your car, but these fuses are normally in the engine compartment relay box. If it isn't the fuse, Please see my ...

brake lights stay on. pulled pedal, no effect, pulled fuse, lights out, put fuse back in, brakes lights came on again. The brake light switch is defective.

BRAKE LIGHT SWITCH WILL CAUSE YOUR PROBLEM IF YOU STARTING SEE ABS LIGHT BEFORE HAVING THE PROBLEM.WHEN BRAKES APPLIED CURRENT FLOW THE FUSE TO THE BRAKE LIGHTS AND TO THE ABS ECU AND ABS BRAKE SYSTEM

...the stop light switch, which is mounted on the upper brake pedal (it has an electrical plug in attached to it) if it wont shut off the problem is in the brake switch on the brake pedal. Unplug

Fuse number for brake lights on 2000 mercury mountaineer Which number fuse is for my brake lights on my 2000 mercury mountaineer? Number 13 20amp

my brake lights are not working, bulbs are new and fuse is good. what could be the problem Brake light switch may need adjusting or it may be defective. Check the brake light switch.

...light switch so if you are having just rear park lamp problems, again it would be an electrical wiring problem. If you are talking about the brake lights, in that same panel fuse number 25 would be ...

...brake light wont go off..is there a relay or fuse to check If it shows brakes it might be because you need new brake pads do not ignore this light. Have your brake pads and rotors checked out or you ...

brake light also wont also but is illuminate. The Top Brake light do light up when press Check the fuses to the brake lights , All of the signal and tail lights etc. are usually on one circuit. If not

...fuse that is. BRAKE LIGHTS AND SHIFT LOCK Look under the dash, on the brake pedal arm. There are one or two switches that activate brake lights and/or shift unlock. Check for loose mounting nut or a ...