2003 Mercury Mountaineer "7 wiring" Questions

Ad

Question about Mercury Mountaineer

1 Answer

im sorry,its a 1997 ford 302 (1997 mercury mountaineer) codereader indicates 'no. 7 cylinder misfire' remove the #7 spark plug if it does not look fouled start the vehicle with the plug still ...

Ad

Question about Mercury Mountaineer

2 Answers

...wiring diagram for a 2001 mercury mountaineer 5.0 Run each wire from number to number..1 to 1, 2 to 2, etc... 1-3-7-2-6-5-4-8 thats the firing order for your motor ...

Ad

...Mountaineer 5.0 here is the firing order for the 5.0 as well as what goes where; firing order 1-3-7-2-6-5-4-8 I would need to know the 8th digit in your VIN to be exact (E/P/X). However this might ...

Question about Mercury Mountaineer

1 Answer

install a 7 wire trail brake controler for a 2006 mercury mountaineer v8 If your vehicle is anything like my F150 there is an empty unused electric connector just under the dash about where your knee ...

Question about Mercury Mountaineer

1 Answer

...light and abs light came on then speedometer quit working then it comeplete died. had it jumped off 7 different times. someone said the battery is completely dead. whats going on? SOUND LIKE ...

Question about Mercury Mountaineer

1 Answer

..."K"Firing Order: 1-4-2-5-3-62000 Mercury Mountaineer 5.0 liter SOHC V-8 VIN "P"Firing Order: 1-3-7-2-6-5-4-8Hope this helps; also keep in mind that your feedback is important and I'll ...

Question about Mercury Mountaineer

1 Answer

...lighter is powered by fuse 24 in the interior fuse panel and the console power points are fuse 7 and 9 in the battery junction box under hood. If you have a 12V test lamp you can check the

...picts online - lots around). There should be an electric motor like device (about 5 inch round and 7 inch or so long) with 2 or 3 wires coming from it. It will be secured by typically 2 bolts.

Question about Mercury Mountaineer

1 Answer

...the bolts holding the starter to the mount...usually 2, sometimes 3. 6. Remove the old starter. 7. Carefully compare the old to the new...make sure they match. 8. Install the new starter...thread ...

Question about Mercury Mountaineer

1 Answer

...wiring connected to it. Once the assembly is away from the frame lay it down on the bumper. 5 Remove the brake light socket from the taillight assembly. Rotate the socket a quarter-turn ...

Not finding what you are looking for?
2003 Mercury Mountaineer Logo

866 questions posted

Ask a Question

Usually answered in minutes!

Top Mercury Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...