2004 Suzuki Forenza "proper place timing marks 2" Questions

Ad

timing marks wont line up when u turn it 2 time like the video says The timing will not be correct. If the crankshaft is rotated 2 times, the camshaft will rotate 1 time. If the marks will not line up

Ad

Question about Suzuki Forenza

1 Answer

...proper alignment. Disconnect the negative cable on the battery.2Take off the accessory drive belts, and take out engine mount insulator, located in the engine support bracket. Detach the engine ...

Ad

Question about Suzuki Forenza

1 Answer

...place to hold the silent shaft while continuing. Install the belt to the crankshaft sprocket, oil pump sprocket, then camshaft sprocket, in that order. While doing so, make sure there is no slack ...

Question about Suzuki Forenza

1 Answer

...over twice-make sure you rotate back to the zero degree mark. 7 Ease the timing covers back in place and tighten the bolts. Remember to reattach the battery cables before you try to start the

...place to hold the silent shaft while continuing. Install the belt to the crankshaft sprocket, oil pump sprocket, then camshaft sprocket, in that order. While doing so, make sure there is no slack ...

...or keys) 2: put it back ,with rotor same place. easy huh? but if you lost the timing, its 8 steps. (not counting the fine tune) http://www.fixkick.com/IGN_timing/8v-procedure.html#fastplant old

...place while I remove and then replace onto the new engine, after I send the heads off to the machine shop. Is there a special tool to achieve this? Also, if the either of the 2 timing gears turns ...

...place. 6 Take the timing belt off. Install Your Timing Belt1 Replace the timing belt counterclockwise motion beginning at the crankshaft. 2 Unlock the tensioner. Recheck the timing marks by turning ...

Question about Suzuki Forenza

1 Answer

...place, until the timing belt can be installed. Tighten the idler pulley locking bolt until snug. The idler pulley bolt will be tightened to specifications after the final adjustments are made. ...

Question about Suzuki Forenza

1 Answer

...68 ft.lbs. (92Nm) Now you can Install the Camshaft sprocket and tighten it to 65 ft.lbs. (90Nm), while holding sprocket in place using the correct wrench. Confirm proper timing mark alignment.

Not finding what you are looking for?
2004 Suzuki Forenza Logo

787 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Suzuki Experts

Marvin
Marvin

Level 3 Expert

85216 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...