...Install Steering Pump Pulley Remover T69L-10300-B on the power steering pump pulley (3A733) , and place the tool and power steering pump in a vise by gripping the small hex-head of the tool. Hold the ...
...install the power steering hoses. Tighten all fittings to the manufacturer's specified torque. Be sure all hose-to-chassis clips are in place. Do not position hoses where they rub on other ...
...steering rack is shot. Have a reman installed and flush the cooler or the new one will fail. Install a FILTRON magnetic filter, in the return line also. Use Mercon or Mercon V Fluid,not auto part ...
Question about Ford Cars & Trucks
...steering pump and install the 3 bolts. Tighten to 25 Nm (18 lb-ft). Connect the pressure line-to-pump fitting. Tighten to 75 Nm (55 lb-ft). Connect the power steering pump supply hose. Install the ...
...all the way left and right to get any air pockets out. Since there is still fluid in the rest of the system,take some time to flush the system out.Low or bad fluid can damage the power steering
Question about Cars & Trucks
...fluid was refilled into the pump or one of the valves in the power steering rack has failed and is pressurising the pump chamber causing the cap to blow off. When you replaced the pump , there would ...
...steering fluid level. That sound is telling you your power steering pump is low on fluid. You need to go to an autoparts store and get a bottle of power steering fluid and add it to the reservoir of ...
...steering acts like its low on fluid at an idle. Rack & pinion & pump are a year old. I have an inline filter installed. Removed filter to see if it was pluged, no difference. Plenty of fluid ...
...install power steering pump pulley remover T69L-10300-B, or equivalent, on pulley hub. Clamp hex head of tool in a suitable vise, then hold power steering pump in place while turning tool nut ...
...steering fluid, and a Haynes manual. Use a suction gun to remove the power steering fluid. Position a drip pan under the pump and disconnect the high pressure line and fluid return hose. Cap the ends ...
630 questions posted
Usually answered in minutes!
758 Questions
706 Questions
609 Questions
479 Questions
344 Questions