2002 Mercury Mountaineer "wheel" Questions

4 wheel drive when backing up and trurning the car feels like the brakes are being applied and wheels kind of hop It sound like your trying to turn on black top or concrete. Limited slip four wheel ...

1998 Mercury Mountaineer wheel bearing What tools are needed to change the front wheel bearing on a four wheel drive. 2x2 = nothing special since they are old fashion tapered bearings 4x4 = nothing ...

driver side tire is turned like the wheel is turned but it is not turned Suspension or axle issue. Jack the vehicle. Spin the wheel. If it wobbles could be bent wheel. Usually from a hit. Could be ...

cant figure how to change in or out of 4 wheel to 2 wheel where is the switch, lever It has All Wheel Drive, which means all four wheels are always engaged thru a clutch system.You may want to get an ...

cant locate four wheel drive on off switch dont know how to switch from two wheel drive to four wheel drive, cant locate the switch sound like you have the automatic four wheel drive system where the ...

...bug grind There are several possibilities. If you have a 4x4, the unit could be between the 2 wheel drive and 4 wheel drive modes. There is also a 4 wheel drive low and 4 wheel drive high mode. ...

starter locked and steering wheel wont move. When I put the key into the starter, it wont move and the steering wheel is locked up. How do I fix it? have you tried pulling the steering wheel to either

how do you change a wheel seal on a mercury mountaneer 1998 rear end Axle Vent NOTE: If the vent cannot be cleared, it must be installed new. A plugged vent will cause excessive seal lip wear due to ...

...is making a noise in the front end. Sounds like I put winter treads on. Also sounds like a four wheel drive in low range. Checked the wheels and there is no play, thought that it might be a wheel ...

Will wheels & tires from a 2003 F250 fit on a 2003 Mercury Mountaineer? The Wheels will fit - however there are other considerations. The width - will they rub of the tires. The offset - this is ...