1999 Jeep Wrangler "hard shift 2nd 3rd manual" Questions

Ad

...hard to pull down into reverse. What concerns me is the fact that the gears I'm having trouble with are the lower (on the shifter - 2nd, 4th and R that you have to pull down). Not the upper that I ...

Ad

...to drive Unfortunately you need a new transmission.  A bad speed sensor can cause the transmission to shift hard but if it is free wheeling in 3rd gear that has nothing to do with the

Ad

...hard to 1st to 2nd an kind of has a long shift from 2nd ito 3rd fluid dont smell burnt an dont feel any sliping got every gear that long shift from 2nd to 3rd has me nerves Hi! Maybe you could first ...

Question about Jeep Wrangler

1 Answer

shift very hard from 1st to 2nd and from 2nd to 3rd ,Already replace the VCC on the rear axle. Also checked the teeth on the ring in the rear. you need to change your clutch slave cylinder if ur truck

Question about Jeep Wrangler

1 Answer

...shift difficult? its got the automatic transmission that yoy can switch over to manual 1,2,3,4 and in drive or manual when it shifts from 2nd gear into 3rd gear it shifts hard Kia for the best ...

Question about Jeep Wrangler

1 Answer

hard diagnosing this kind of problem like this but i could tell u what it might be. it could be your TPS sensor. shift solenoid or something wrong with the transmission valve body. i hope this helps i

...shift to 2nd or 3rd(intermittent) until you let off gas. Also slips out of 2nd back to 1st sometimes immediately. I have a 1994 Mazda Navajo 4.0l with the A4LD. The transmission struggles to stay in ...

...hard from 1st to 2nd and 2nd to 3rd. Finally got a code (not sure if same issue) code states Failed output speed sensor. Also states poor electrical connection. Where is this sensor located and what ...

Question about Jeep Wrangler

1 Answer

shift it from 3rd. there is a gounding sound from 2 metals (feels like the gears) rubbing when i force it in 2nd gear from 3rd. The pick up is kinda clutchy though but only 2nd gear is hard to put in,

Question about Jeep Wrangler

1 Answer

hard , and it automatically shift to 3rd gear, and then it will be stuck in 3rd gear, but it only does it whatever speed it is. codes p0732 and p1529 are what I got with the obd2 reader. What can I do

Not finding what you are looking for?
1999 Jeep Wrangler Logo

641 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Jeep Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...