2004 Chrysler PT Cruiser "starter wiring position" Questions

starter except the wiring...i connected the ignition first and positive wire second. then connected the clip(black clip) made sure ignition went on first, positive wire second. Neither touching metal.

...make model'. Removed 'Lillian' and changed to 'little'. :>D Question moved to sub category. All in this link. https://www.google.com/search?q=2002+Chrysler+PT+Cruiser%2C+starter+wiring+diagram

...position sensor but I cannot locate it. Thank you. It is located behind the **** of the starter on the front of the engine starting in '03 the 2.4 lt was changes the repair manual failed to update ...

starter . Free wiring diagram's here http://www.bbbind.com/free-tsb Enter vehicle info. year , make , model an engine . Under system click on engine ,then under subsystem click on starting . Click the

dead ignition, shorted coolant sensor, killed ignition, and starter Check the fuse able link is not blown it,s the smaller wire next to.the positive battery cable.

...starter and solenoid: If the wiring looks ok, then look at the starter solenoid for a good connection, and proper voltage at the starter(10 volts minimum while cranking). If the starter spins and no ...

...starter and solenoid: If the wiring looks ok, then look at the starter solenoid for a good connection, and proper voltage at the starter(10 volts minimum while cranking). If the starter spins and no ...

starter relay and cranks fine. ASD relay does not trip, fuel pump relay does not trip. I don't have a wiring diagram, and minimal Chrysler experience. No carb and no points, I'm semi lost. sounds like

...engine doesn't turn over every time, it's probably not a problem with the switch. Might be a bad starter relay. 2. If the dash lights DON'T come on every time, then it could be the switch ...

...cell inside the battery. Check Ground wire from battery to motor first .Then check positive wire on starter Don't waste your time chasing the problem. Batteries will sometimes short themselves if ...