2003 Chrysler Sebring "remove intake manifold 4 liter" Questions

Ad

remove the intake. Will the top and bottom of intake need to be removed separately? Will I need to buy new gaksets? What is the steps for dealing with the fuel injection and gas line prior to removing

Ad

...remove the intake without removing the exhaust. That being a 87 model it has vacuum lines running everywhere. I worked for Chrysler dodge and jeep. The 87 and 88 year models were a pain because all ...

Ad

...intake manifold where it bolts onto the cylinder head (real pain to get to). If you remove the fuel pump there is a plastic spacer between the pump and the manifold (DO NOT LOOSE IT). Good luck ...

Question about Chrysler Sebring

2 Answers

intake manifold. Remove two bolts (4) connecting EGR tube (1) to valve assembly. Remove gasket located between EGR tube flange and EGR valve assembly. Remove two EGR valve mounting bolts (5). Separate

Question about Chrysler Sebring

1 Answer

...intake manifold gasket and a heater core? It is a 2003 Silverado base with 4.3 liter V-6 and automatic trans. Thanks first check the radiator tanks, common problem with the plastic tanks getting a ...

remove the intake. When doing this remember to replace the intake manifold gasket. Most parts stores will only sell the kit and not the upper intake gasket alone. Price should be $75.00 for gasket set

...intake manifold. Removal & Installation Before servicing the vehicle, refer to the Precautions Section. Remove or disconnect the following: Negative battery cable Starter electrical connectors ...

...Remove the air intake, hose and the coolant neck (outlet) bolts using a ratchet and & 13 mm socket. Remove the outlet from the intake manifold. Take note of the direction the thermostat is seated ...

...Remove the intake and exhaust manifold from the cylinder head. Disconnect the spark plug wires and remove the spark plugs. Disconnect the temperature sending unit wire, ignition coil and bracket ...

Question about Chrysler Sebring

2 Answers

remove the exhaust crossover pipe, then you can access the thermostat. The pipe is metal to metal so you don't have to worry about a gasket when your done, but you need to shake the pipe as you are re

Not finding what you are looking for?
2003 Chrysler Sebring Logo

438 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Chrysler Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...