...a link to a new one. ...
Question about Chrysler Town & Country
...wiper. tighten the lock nuts down (do not over tighten) wet down your windshield with glass cleaner or windshield washer fluid and test wipers. If they still hit you can lower the passanger one a ...
Question about Chrysler Town & Country
...windshield wipers will start operating by themselves or when in the intermittant mode will begin to wipe at a steady condition and not intermittant. sounds like you have a faulty wiper control module ...
...windshield wipers needs to be replaced. I have the new piece but to install it I have to remove the whole wiper. There is a little plastic cover over a 15 mm nut, which I have removed but the wiper ...
...the fuel gauge except the body computer. They have rebuilt ones and they have to program it to your ...
...windshield wipers will only run if you use the washer function. I have replaced the multi-function switch and the wiper motor. No change. What else can I test/replace to fix my wipers? you need to ...
...and Country and when i turn on the windshield wipers all i get is a clicking noise. The wipers act like they want to move but don't. Could this be an electrical problem or a the wiper motors? ...
Auto: Windshield wipers Hi, I have a 1996 Chrysler Town a& Country and for some reason when I switch "on" the windshield wipers, the arms goes thru the wipe action but takes about 30 seconds for the ...
...windshield wipers will only run if you use the washer function. I have replaced the multi-function switch and the wiper motor. I have also checked the two relays for the wiper. They both seem to work ...
windshield wipers dont work On my 94 town and country the windshield wipers dont work, there is no voltage to the motor at any speed setting, as I change settings in the speed control there is a ...
568 questions posted
Usually answered in minutes!
1,229 Questions
1,289 Questions
1,079 Questions
746 Questions
666 Questions
