1997 Chrysler Town & Country "ignition switch" Questions

...ignition switch my starter does not stop cranking even when i turn the ignition off. I had to remove the battery terminal to stop the cranking. what do i do? It's either your ignition switch or ...

...to turn even after shutting off the ignition switch. What should I look for to correct this issue? Right after turning on the ignition switch, I had no fire. Look for a defective ignition

ignition switch problem 2000 town and country 1. Starter wont engage 2. will start and run if I remove switch and the electrical switch and turn the the ignition block with screwdriver 3 Had locksmith

...ignition switch to the starter and it's solenoid. The ignition switch is in the steering column and controls power to everything. Just be glad the ECM hasn't been fried. Don't start the car again ...

...problems Sounds like you have faulty connection at the ignition switch, or the ignition switch is starting to fail. That's if the ignition switch is attached to the dash and not the steering

...ignition switch is in the RUN or ACCESSORY positions .Your problem sounds like the radio and possibly the other affected devices are lacking power in the accessory position. This may be an issue with ...

the air condition/rear window wiper buttons. Can anyone help with some direction as to what I must do? Thanks Faulty ignition switch.Replace only the ignition switch and not the ignition lock cylinder

my 2002 town and country chrysler van, keeps blowing an ignition switch why? why would the ignition switch keep blowing? A major short to ground in the wiring ?

...the key, if that doesnt work then i would say the ignition switch is worn the tumbler are worn, also try a spare key maybe the key is worn,if all fails then switch needs replacing, hope this

...ignition switch to not want to turn every time? The tumblers inside your ignition switch are probably worn and dirty. You can try cleaning and lubeing the switch. Also your key could be worn. If you ...