...they changed the brakes did they damaged the ABS wheel speed sensor. It is mounted on the front axle on the back side of the brakes. Sensor & harness are one piece & must be replace ...
1999 town & country. speedometer won't work & won't shift gears. Codes p0500.p0700,p0731,& p1790 I replaced the speed sensor & this took care of the problem.
...speed sensor and ABS module, scanner still shows left sensor at o mph all the time you need to check for voltage to sensor from module or a broken wire,also with a multi meter check for resistance ...
Check engine light is on Checked with OBD II and code 700 & 740 popped up. Is it the Transmissions Range Sensor, Speed Sensor or both? Replace and done
...sensor affect shifting in my 1996 chrysler town & country? When I started having problems I put a scanner on it, and the only code it put out was for a oxygen sensor. Could the 02 sensor affect ...
...gave us no codes & even then, there could be several possible causes for the light coming on A Wheel Speed Sensor is a fairly common item that fails chk brake pad sensor and brake fluid level ...
...speed density fuel control . Do you have a scan tool that can view sensor data . What are the fuel trims ( short & long term ) showing ? PCM problem ? O2 sensors stuck lean , adding propane , do ...
Question about Chrysler Town & Country
Check engine light came on checked with OBD II and code 700 & 740 popped up Replace input and or output speed sensors located on the transmission
...working. What could cause that?? Sounds like it could be the speed sensor, it's located on the transaxel just about where the right side axel goes in, try un-plugging it and plugging it back
...amp; Country. I get no heat and the temp gauge does not move off of cold. Occasionally after accelerating onto a highway the gauge moves and the heat comes up. Any ideas? If the coolant level ...
788 questions posted
Usually answered in minutes!
1,229 Questions
1,289 Questions
1,079 Questions
746 Questions
666 Questions