1995 Chrysler Concorde "turning ignition fuse blows" Questions

Ad

...Fuse keeps blowing when I turn the ignition on to start my car I was driving down the road when the Car sputtered then started going again a few moments later the car died, I figured it was the fuel ...

Ad

...fuse blows immediately Every time i turn the ignition the 20A fuse will blow. Try removing the harness connector to the motor, and see if it still blows the fuse, then you've isolated the

Ad

...FUSE BLOWS WHEN IGNITION IS SWITCHED ON IGNITION SWITCH TESTED AND OK something connected too ignition sdwitch has short to ground. remove all fuses except 20amp that blows turn on ignition see if ...

ignition 60amp maxi fuse under the hood. The first time this happened, I replaced the fuse and the SUV ran fine for a day or so. After i drove over a fairly lage bump the fuse blew again. Now the fuse

Question about Chrysler Concorde

2 Answers

ignition fuse switch keeps blowing Replaced the fuse about a week ago and it worked fine, now everytime I put a new fuse in ignition sw1 it blows. AS soon as the key is turn slightly it blows the fuse

Question about Chrysler Concorde

1 Answer

ignition is on this fuse. If you have the V-6, the camshaft and crankshaft sensors are also on it. What I recommend is to disconnect everything on the fuse except the PCM, and then turn the key on. If

Question about Chrysler Concorde

1 Answer

...ignition fuse #11 blows. I have unplugged the wire harness to the transmission and it still blows. I unplugged the computer and found that the blue plug in which goes to the ignition makes the fuse ...

Question about Buick Cars & Trucks

1 Answer

...fuse blows instantly. I've replaced my ignition switch and fixed my ignition column yet its still blows. What do I do? pcm fuse blows instantly ???? What number fuse , how many amps ? Where is it ...

Question about Chrysler Concorde

1 Answer

...ignition fuse ignition fuse blow when turn key will turn over but not fire Check to see if you are using the proper fuse. If so, disconnect the starter solenoid and then try to start the vehicle. If ...

ignition, the fuse blows. Any ideas on what I could check? I did disconnect the wiper motor and tested. The fuse still blows when the ignition is turned on. could be anything and without a look myself

Not finding what you are looking for?
1995 Chrysler Concorde Logo

292 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Chrysler Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...