1994 Chrysler Concorde "getting fire" Questions

...getting fired up no current to the spark plugs and we already checked the core pack and the crank shaft sensor and still no fire to the spark plugs. check for a bad eec relay in your buss box, ...

...see if the fuel pump is even getting power when key is on I CHANGE CAM AND CRANK SENSOR,FUEL PUMP,COMPUTER BRAIN BOX AND COIL PACK STILL GETTING NO FIRE UNLESS I JUMP A FIRE WIRE FROM ...

...getting any fire..pls help Two things and easy to check before you do anything else.1)Check for Fuel-if fuel come to engine( fuel pump is working or not ? ) . 2) Check whether electric power is ...

...and it wont start it is getting fuel and is rolling over but getting no fire Have you checked the computer for trouble codes ?Are you getting voltage to the coil ?Have you checked the ASD relay

2.7 l misfire after changing plugs 2.7, 80000 miles, runs on full synthetic oil, perfect runner for all miles, just replaced spark plugs and now the #2 cylinder is not firing. can pull off coil wire ...

was putting in coolant left running come back out it died and is now getting no fire to the car your thermostat is stuck closed. You will have to replace the thermostat.

i have 1994 chrysler concorde was getting off ramp and car stall would not crank check and is not firing plugs what cause this my 1997 buick lasabre the security light has come on and won't start . ...

our 98 3.2 l no spark ,, no injector pulse but the fuel pump run . i change the cam sensor the crankangle sensor , the pcm and wont fire A computer scan is needed,not knowing your kownledge level ...

I keep melting fuses for my blower in my heater? You have a serious electrical fault in your blower/heater. The fuse is protecting your wiring and prevents overheating/burnout.Do not install a higher ...

i have a concorde 2000 3.2 it overheated and melted a whole in resivour tank we replaced tank still overheated .so replaced thermostat,still gets hot,now loud noise clunking is it waterpump? Over ...