timing chain was replaced on 99 model v6 suzuki vitara 20000 ks ago but the the number one tensioner was not released properly because plastic retainer was not removed have stripped down and released ...
...timing chain tensioner on the cam shaft chain was broken and some teeth were missing on the cam gears. The lower chain and tensioners look fine. Do you think that this could be causing a engine knock ...
...timing chain tensioner it is a plunger type and called the secondary tensioner on a 2000 chevy tracker 2 litre. as well there is slack in the chain and when the cams come off the lifters when turned ...
Question about Suzuki Vitara
timing chain, tensioner I check the fuel pressure but don't have pressure in rail. I test the pump, it work but I don't know of there is enough pressure. The TPS, MAF and coil worked before the engine
ratteling timming chain on 2ltr v6 The timing chain needs tightened, or maybe replaced. You can use the tensioners on the lower gear pulleys for that.
...timing chain tensioner(s) is on the way out. Quite a lot of 'chatter' at the moment, no loss of power, no smoke and still starts on the button. Where can I source tensioners,can I do the job by ...
...to remove that as well. Then the camshafts have to be removed (all 4). This means messing with the timing chains - there are 3, but you'll only have to mess with 2. Remember, you'll probably want to ...
...is heard but less noisy and lasts about 5 seconds. Any help will be great.. Thanks two things...your lifters are worn out and you timing chain tensioner is also worn try a 20-50 oil or a can of ...
...Vitara Vibrates just above Idle and worse under a load. I took it to a mechanic and he changed the timing chains, tensioners and guides. Then he replaced to motor mounts with aftermarket parts. The ...
641 questions posted
Usually answered in minutes!
119 Questions
102 Questions
89 Questions
65 Questions
16 Questions