1998 Jeep Cherokee "lock cylinder" Questions

Ad

...lock cylinder and turn it to the ON position. Fig. 1: Using a pair of needle nose pliers, remove the key warning buzzer switch and contacts from the steering column Remove the key warning buzzer ...

Ad

Question about Jeep Cherokee

1 Answer

lock cylinder and the ignition switch on the lower part of the steering column. Problem is that no matter what I try, even if I disconnect the igniton switch, I can't get the actuator rod to allow

Ad

...lock cylinder from steering collum need to know how to remove the ignition lock cylinder from a1990 Jeep Grand Wagoneer steering collum Pull airbag you are going to need a wheel puller a pair snap ...

lock cylinder backdoor jeep cherokee loredo 1992 is this cylinder to open because the key stock into it , soi,I cant turn the cylinder with key see if you can take the door panel off from the inside ...

...lock cylinder retainer button to push in so the lock cylinder can be removed from the housing. If the steering wheel is locked than the lock cylinder will need to be turned in order to unlock it. If ...

...cylinder on my 1995 jeep cherokee loredo Roll the key back to the lock position and push the roll pin in. When you go back together, rolling the key forward pushes the roll pin back out to lock it in ...

lock cylinder out to replace it when I can't turn the key to the on position. How do I turn the ign. cylider to the on position so I can push the release button and slide the cyl. out. Sounds like you

no avail. I sprayed some WD40 and still nothing. Any advice? You need to go to a locksmith and purchase a new lock cylinder. Remove the retainer clip from the old cylinder from the inside of the hatch

Question about Jeep Cherokee

2 Answers

...lock cylinder then try to turn it on. the hammer may jar it enough I had the same problem and tried to tap the area where the key goes into the steering column. Be very carefull not to apply too much ...

...lock cylinder from the passenger door of a 1990 Jeep Laredo. need to have it rekeye. a diagram would be nice. Remove linkage rods from lock and slide clip that holds it to door skin off. Lock is then ...

Not finding what you are looking for?
1998 Jeep Cherokee Logo

1,780 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Jeep Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...