1993 Isuzu Trooper "causes hard start" Questions

...hard to start then dies like no petrol, when it does start blows black smoke like running rich ? check injectors for leakage when engine off-will have to install fuel press gauge run engine and check ...

hard start. after it sits for about two days then it starts normal If you idle or drive for awhile then turn it off then it will not start again until after many hours.Pls advice with much Rgds,JKoske

...start the engine. It's caused of glow plug problem? Could you reply urgently. TQ, Razimi the hard starting is the glow plugs are not all working and this is a simple job of testing them and renewing ...

...start again and sometimes the vehicle has to be towed. What the the main problem and how can I adjust the idle speed up. Are you running the recommended oil grade? As the injection system is operated ...

...hard to started,diesel knock when it idle,engine light stay on with a code p10193 or p1393,already replace fuel filter,engine oil,train and renew a diesel fuel from the tank,If the engine light turn ...

...hard like it is under pressure but no water in the oil a reed896: There are a number of potential areas which will cause the symptom you describe. Areas to check: 1.Prior to starting, inspect the ...

...causes gross over fueling retarded spark flooding and more, all bad, never do that. test the sensors and leave them alone that work. (ask how to test sensors, its not hard) clear the errors, by ...

TOD Graphic Flashed "Check" My 1999 Isuzu Trooper has "Torque on Demand" and the computer graphic started flashing "check". I took it to a mechanic who put it on the computer and it didn't indicate ...

...hard to say without having the vehicle here to check the starter circuits.  There are several things that can cause this including a malfunction in your vehicle immobilizer circuits (Your ...

...start up and only keep running if I hit the gas really hard and run it for about 5 minutes the idel was really low and would die. I check everything I could. Finally I removed the hose from the carb ...