pistons have to be screwed in at the same time as they are pushed in. In some cases you need a special tool. You can try a set of good needle noise pliers, and try to turn the piston as you push it in
...stop running water came in an now it wont start you could have sucked water into the engine and welded the pistons to the positions that they were in best way to check would b to take the engine ...
...a cylinder causing the rough idle. It's easy to check which cylinder is not firing. I do the old water technique. While engine is at idle, squirt some water on the exhaust manifold ports...water ...
...pistons. A mechanic friend of mine says that the engine is not worth trying to repair and that these engines are notorious for this type of problem! He said that it could be the cylinder head gasket ...
4jb1 engine isuzu 4jb1 engine producing foul exhaust smoke I can tell about a couple of odors from oils that are quite indicative of the places where they oil is leaking into the exhaust though. ...
...you info say to use #2? if say its a 4 cyl. #1 would be front of engine, near belts and aternator, water pump not near where engine mounts to
...your coolant level, see if it's still full, or if it's discolored (like oil is mixing into the water). Check the color of the oil, see if it looks like chocolate milk. If you're losing coolant,
...pistons and crankshaft seals were installed. An old radiator was put in place. After a week of use, it overheated and I drove it from the place where it overheated to the mechanic - a distance of ...
150 questions posted
Usually answered in minutes!
480 Questions
463 Questions
423 Questions
323 Questions
317 Questions