2000 Chrysler Sebring "reset engine light" Questions

engine light is to correct the fault then reset the light. If you just reset the light and fault still exist, the light will come right back on. To reset the light you disconnect the battery for about

...DO THIS FIRST TURN THE KEY ON (BUT DO NOT START THE ENGINE ) PRESS THE GAS PEDAL DOWN THREE TIME IN TEN SECONDS THEN TURN THE KEY OFF THATS IT START THE ENGINE AND IT SHOULD BE RESET IF NOT TRY ...

...reset it self HI. There is no such button present in your vehicle. There are only two ways to shutdown the check engine light. These options will only shutdown the light, temporally. The first option ...

...in succession. Then turn the key fully on and start the engine. This will reset the oil light. It will come back on in about 3,000 miles as a reminder to change the oil. Joe Thanks for choosing

reset check engine light amber check engine light is on your question is?????????

reset {turn off} the check engine light? the belt driving the alternator and the air conditioning compressor came off due to loose mounting bolts on compressor. tightened mounting bolts, replaced belt

...engine is quiet as usual, lots of oil in sump,( Check dipstick)--Usually the light will reset after a certain time period--unless other problem. If over 100,000 miles --have oxygen sensor tested. We ...

...engine light came one. Upon reaching 100,000 miles all service enging lights do come on, Have the light reset by a technician if you do your maintenance yourself This can be the cause of ...

...engine light and gascap showing, replace gascap from dealer still showing check engine and gas cap after reseting the code and gascap. It might take 2 or 3 gas fill-ups before the light goes off. ...

...engine light came on and the gas cap was loose, now the light won't go off, can you tell me how to reset the computer without disconnecting the battery cables ? it is a 2004 Sebring, V6 need a ...