2000 Chrysler Sebring "replacing oil pressure switch" Questions

Ad

...be the problem, and how can i fix it? Sounds like bad oil pressure switch. Is the engine making any loud noise(s)? I'd replace oil pressure switch and/or check connection at oil pressure

Ad

...oil pressure drops when the car warms up but wheh you mash the gas, the pressure rises.the car use to shut off when the oil pressure droped but now it dosent. i replaced the oil pressure switch,had ...

Ad

Question about Chrysler Sebring

1 Answer

...oil pressure swith on the engine there is no reset procedure. If you just replaced the oil pressure switch and still have no oil pressure, you are going to have to use a manual oil pressure gauge to ...

...stop sign 2001 chrysler sebring 2.7 v6. Oil is full without confirming oil pressure,(not level)are within normal specs,I would replace the oil pressure switch,If you need the location let me know. ...

Question about Chrysler Sebring

1 Answer

...this helps and good luck :O) PS check the oil pressure with a oil pressure guage before replacing the oil pump. It is much more common for the oil pressure sending unit to go bad than the oil

Question about Chrysler Sebring

2 Answers

...replacing oil pressure switch they go out a lot make sure you get one from dealer aftermarkets don't work,also normally you can tell if is your oil pump the engine when idle on stop light will star ...

Question about Chrysler Sebring

3 Answers

...Oil pressure was measured at full spec, both at idel and running. may be just at the low limit. when the inertia sloshes oil forward the sensor can no longer "see oil" and reports it as low. Check at ...

...oil pressure switch. If so, how difficult and costly is that to be replaces on a 2000 Chrysler. For all car problems kindly visit one of the link http://www.autozone.com here you have to register and ...

Question about Chrysler Sebring

1 Answer

...terminal and field connection. Disconnect the electrical connector to the A/C pressure switch and A/C clutch. Remove the engine oil dip stick. Remove the 2 upper mounting bolts. Remove the

...oil pressure switch or line. 6. Remember Oil or any fluids leak down not up so start your search high and work low eliminating as you go. Repair process: 1. Start conservative , check pan mounting ...

Not finding what you are looking for?
2000 Chrysler Sebring Logo

586 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Chrysler Experts

Marvin
Marvin

Level 3 Expert

85206 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...