...TORQUE STEER. One front wheel pulls harder than the other under acceleration, and as you say, its only noticeable at the first moment. A renewed front end shouldnt have that problem. maybe some ...
ball joint specs: Torque the ball joint-to-control arm nuts/bolts to 85 ft. lbs. (115 Nm). Torque the castellated nut to 108 ft. lbs. (147 Nm). Upper ball joint specs: Tighten the mounting bolts to 42
Question about Cars & Trucks
...ball joint STUD nut, they are torqued in two passes. The upper ball joint to 37 Lb Ft on first pass and then final pass torque 90-110 degrees. Lower ball joint 37 Lb Ft and 125-135 degrees. See ...
ball joint installation the new ball joints came with torque specs which are different from my haynes manual, i was told to go with the haynes manual, but the ball joint instructions call for 2 ft.lbs
Question about Mercury Villager
...ball joint torque specs 2005 Toyota sequoia Just looking for tightening castle nuts What is theTorque on front ball joints 2005 Toyota sequoia ... ...
Question about Mercury Villager
...ball joint torque specs 2002 explorer xls 4x4 4.0L v6 gas Need torque specs for upper ball joints. It's a 2002 Explorer XLS 4x4 4.0L V6 gas Douglas, 90 lb-ft is ball joint nut torque. Check the ...
Question about Mercury Villager
...spec for upper ball joint nut on a 2002 gmc C1500 pickup ? Just installed new upper ball joints ,can't find torque spec anywhere Chevy Truck Front and Rear Suspension Specifications Fastener
Question about Mercury Villager
...ball joint torque specs Big A-- there are specs for the ball joint stud nuts!! You're the exact reason I don't take mine to dealerships!!! Do my own work. Torque specs are put out for a reason u
...ball joint came with torque specs for the mounting bolts to 15ft.lbs each.. My trw upper ball joint came with no specs for the mounting bolts which are smaller bolts than the lowers, how do i know ...
...torque specs, my lower TRW ball joints came with specs, would the mounting bolts be the same torque as the lowers, and what about the main nut itself... 1996 jimmy 4x4. mounting bolt torque would be ...
387 questions posted
Usually answered in minutes!
478 Questions
379 Questions
326 Questions
276 Questions
178 Questions