1996 Jeep Grand Cherokee "fuse volt gauge" Questions

...switch (the key) did it to me on volt gauge wouldnt work ding go dead and check guage light would come on check for loose or dry rotted wires around the fuse box under the hood it fixed mine good ...

...volt gauge No fuel gauge scanner will not connect to obd hookup, says no communication. PLEASE PLEASE HELP my 1996 jeep is doing the same thing.the fuse I have been changing is under hood in fuse ...

...have a 96 grand cherokee engine died fuel gauge,volt meter not working have checked all relays,fuses and replaced coil still nothing check all grounds first then start tracing looking for burned ...

gauge keeps moveing back and forth and just had the new alternator tested and it tested fin and all the fuses and wireing looks to be ok also.. whats causeing this? what engine option?????????????????

power everywhere but the gauges and now won't start.was running put in reverse and it died ?checked the fuses and now lost help What have you done so far. Need to see if the vehicle has both fuel and ...

...not do that first????)
after checking both cluster fuse first., with a volt meter. (12v both side fuse is good fuse,keyon)

we do the self test next.
ask or read your other post its

aircon doesnt switch on. checked fuses Needs ComPresser An automotive air conditioner's pressure switch cycles the vehicle's compressor on and off when the refrigerant pressure falls below an ...

...fuse test is with a volt meter , key on, 12vdc on both sides, not 0volts. send best is to check them for 0 ohms (not infinity ) pulled. fuses that look bad are bad. fuses that look good can in fact ...

...fuse so i don't know what it is. Ive done most of what the other s have said they did. Any thoughts would be appreciated. have you checked the wires to alternater Sorry I left out the basics...I ...

...and windows dont roll down but radio is still on just cant see graphics to radio or mileage gauge check all fuses see if you have any blown a test light or volt meter will tell you if fuses are ...