1989 Jeep Wrangler "clutch hydraulic problems" Questions

...hydraulic clutch and i checked for fluid which there is plenty, i checked for leaks and did not find any. Do the hydraulics of a clutch operate by means of a master cylinder like that of the brakes, ...

1999 JEEP WRANGER 4 CLY 5 SPEED WONT GO INTO REVERSE GRINDS Problem is with clutch Hydraulics or clutch mechanics. Bleed clutch. If no leaks, Clutch master or remove transmission for clutch inspection

..."Though hydraulic systems are great space savers, the older fully mechanical clutch arrangements gave you far more adjustment options with which to overcome problems such as you now have. Good

...hydraulic clutch line linked from its own master cylinder to a slave cylinder. This is a better option than your standard shift linkage used on older vehicles. If your master cylinder goes you will ...

...hydraulic clutch, it is conceivable that the fluid has leaked out. For areas of leakage check up under the dash where the clutch master comes through the firewall., or check down at the transmission ...

...clutch should go to the floor =) But if it's not disengaging the clutch disk, there's definitely a problem between the pedal and the clutch disk. I'm guessing you have a hydraulic

pedal goes all the way to floor and still in gear YOUR CLUTCH IS NOT DISENGAGING. THERE COULD BE A PROBLEM WITH THE CLUTCH MASTER/SLAVE. CHECK FOR ACTION AT THE SLAVE. ALSO, A BROKEN PRESSURE PLATE ...

...something wrong. Sticking or binding in the pedal linkage, cable, cross shaft, or pivot ball are common causes. Sometimes a blockage or worn seals in the hydraulic system can also cause a hard

and would not come up ,got lucky and by driving it got back home, You most likely have a hydraulic clutch. Thus either the master or slave cylinder would have to fail to cause the problem you describe

Clutch problems. very hard to shift gears. 1995 K1500 p/u 5.0 engine. Hydraulic clutch. can it be bled ? should be able too!