idle speed, by letting small amount of air in. It has a plunger on it that moves back and forth slowly to adjust amount of air mixture, it is controlled by computer. Unplug it and just turn on key and
...Air Idle Control Valve, Throttle Position Sensor, Map Sensor, Cleaned out my PCV valve. My EGR Valve is in great shape so there is no need to replace my O2 Sensors. It is still running rich and turns ...
if its running out of gas but tank is full, What should I do? have you checked your iac which is idle air control to see if it is stuck or gummed up? will be located on or right next to throutle body.
Question about Isuzu Trooper
...Idle Air COntrol Valve to replace but as it turns out on my model it doesnt even have one. While I had the intake off and stuff we took the throttle body off and cleaned it thoroughly with throttle ...
...idle when starting. Has been for recall on injectors. Re: Holden Australia Now in no start situation. Has had key re-programmed. Still no start. Immoboliser light is not flashing while cranking. Fuel ...
...air intake, clean/replace idle control valve and clean throttle body, if your tb is electronic (not sure on your make and model) make sure you do the idle re-learning. That can help with the mpg a ...
...if someone can help, I need it...I love this vehicle!!! i think it is the air intake control valve........ a $50 part or so... and you can do it yourself if you have a little knowledge.....good ...
...air flow" problem. Replaced EGR valve, cleaned the **** out of EGR pipe/passages, checked the solenoid, checked all the hoses, cleaned the throttle body and passage from it to the EGR valve, and ...
...idle and sometimes cut out difficult to start again. both throttle sensors have been changed didn't really work. once engine is warm jeep runs and idles fine. all recall work has been done. any ideas ...
694 questions posted
Usually answered in minutes!
463 Questions
423 Questions
323 Questions
317 Questions
281 Questions