2000 Audi A6 "remove brake fluid cap reservoir" Questions

Ad

Remove outer brake pad from brake carrier. 5. Pull inner brake pad out of brake caliper piston. 6. Check up the brake fluid level on the reservoir, and emptying if neccessary! 7. Push piston back into

Ad

...brake applied. 1.4. Engine idling. 1.5. Air Conditioner and heater OFF. 1.6. ATF temperature must not exceed 104 Fahrenheit degree (40 Celsius degree) at start of test. 1.7. Only ATF with designation ...

Ad

...brake applied. 1.4. Engine idling. 1.5. Air Conditioner and heater OFF. 1.6. ATF temperature must not exceed 104 Fahrenheit degree (40 Celsius degree) at start of test. 1.7. Only ATF with designation ...

Question about Audi A6

1 Answer

...brake applied. 1.4. Engine idling. 1.5. Air Conditioner and heater OFF. 1.6. ATF temperature must not exceed 104 Fahrenheit degree (40 Celsius degree) at start of test. 1.7. Only ATF with designation ...

...brake applied. 1.4. Engine idling. 1.5. Air Conditioner and heater OFF. 1.6. ATF temperature must not exceed 104 Fahrenheit degree (40 Celsius degree) at start of test. 1.7. Only ATF with designation ...

Question about Audi A6

1 Answer

...brake applied. 1.4. Engine idling. 1.5. Air Conditioner and heater OFF. 1.6. ATF temperature must not exceed 104 Fahrenheit degree (40 Celsius degree) at start of test. 1.7. Only ATF with designation ...

remove brake booster vacuum hose. Extract master cylinder from vehicle. On models with manual transaxles, remove clutch hose from brake/clutch reservoir. On all models, remove master cylinder nuts and

Question about Audi A6

1 Answer

brake fluid Remove the cap from the master cylinder reservoir. Add DOT3 or DOT4 brake fluid from a sealed container to the reservoir until the level reaches the full mark on the side of the reservoir.

...brake job, remove the cap at the reservoir. When you compress the pistons the brake fluid pushes back through the lines and if the cap is off it will bleed off any extra fluid. If the fluid overfills ...

brake fluid as necessary. POWER BLEEDING CLUTCH HYDRAULIC CIRCUIT 1. Remove reservoir cap and connect bleeder cap to reservoir. NOTE: Use Bleeder Cap/Modified reservoir cap adapter Snap-on #901-059 or

Not finding what you are looking for?
2000 Audi A6 Logo

709 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1999 Audi A6
1999 Audi A6

469 Questions

2001 Audi A6
2001 Audi A6

386 Questions

2002 Audi A6
2002 Audi A6

347 Questions

1996 Audi A6
1996 Audi A6

186 Questions

2003 Audi A6
2003 Audi A6

183 Questions

Top Audi Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Are you an Audi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...