2000 Acura TL "broke cv joint" Questions

...broke and can't afford a mechanic! You need to take them the knuckle. This is what the brake calliper, the wheel studs, the upper and lower ball joints, and the axle half shaft all connect to. Start ...

...CV joint jack up the side that broke and remove the wheel. Then remove the center nut that holds the CV joint to the hub. Put the car in gear or park so the hub will not turn why you do this or have ...

...but the car doesn't move? If that's the case, you probably broke a cv joint/axle when u went into the ditch. If the cv joint or axle breaks, the engine and drive train can't spin the front

...cv axle broke i put my truck in to 4hi and started moving foward when it began to feel like it was going underload and then bang got out and cv axle busted through it seat. i have a 4inch lift on 35. ...

...cv joint broke and rear part is stuck to transmittion.. There are two types of cv joints used. One type bolts on the other you have to pop out. Do this by prying it out with a big screwdriver. A ...

...CV was damaged as well (lack of lubrication from defective boots)., this is the noise u are hearing I am sure. my 97 maxima was making the same sound and after a while it just stoped, when i changed ...

BROKE FRONT CV JOINT ON PASSENGER SIDE THE PART THAT CONNECTS TO THE SIDE OF TRANSMISSION WHAT IS THIS PART CALLED called a new cv joint.

...surely you will get a knocking metal noise, unless broke in the center cv joint. Jack it up and turn the wheel/wheels by rotating them with your hands.Surely something you will hear. Good

Had ball joints and tie rods replaced. Now what? Check your cv shaft for play or broke cv boot. It could be the grease is gone and the joint is making noise or the wheel bearing hub could also be bad

...CV joint broke 2002 GMC Envoy, Driving down the road, I heard a noise like a tire blowing out. It was the right front inner CV joint letting loose. No previous noise, when it let loose, it broke the ...