...fuel gauge reads it goes slow. you used to service stations to prove its full. using auto shutoff? if not do that first. no need to condemn any gauge for that. or use a dip stick into tank filler and ...
fuel guage reads on quarter full when tank is full. Im thinking sender unit but wanted to check first. best way to test is to jack up the car support the rear with jack stands and wheel chock the ...
Question about Suzuki Vitara
...fuel level in the tank reaches 1/16 to 1/8 full. Do your other gauges/warning indicators work properly with the ignition on? If not, check for power at the fuse panel/fuses. If they do then partially ...
Question about Cars & Trucks
...check on the dash fuel dial. Is it operating correctly as you manually move the seder unit float upwards and then back down again?If the gauge is erratic, or isn't registering anything, then ...
Question about Chevrolet Cars & Trucks
...fuel ? Battery light on -check charging system - is the alternator charging ? Fuel an temp gauge not working probably means you need a new instrument cluster . The only way to tell for sure would be ...
fuel gauge reading zero and light on ? fuel gauge just dropped to reading zero and light on. truck still runs fine. I checked for ground problem, but ??? Ford F-250 super duty 5.4 engine Ford has lots
Question about Cars & Trucks
fuel pump operates gauge? Check fuse 4. Chevrolet S-10 (1994-2004) fuses and relays https://fuse-box.info > chevrolet > chevrolet-s-10-1994-... 1997 - Here you will find fuse box diagrams of Chevrolet
...fuel gauge not working check engine light is on what could be the source of the problem? The most likely failure that will cause your problem is the fuel level sender in the gas tank. The sender will ...
...of a tank Check the connections to the fuel sender are in good order, not loose, wet or corroded. Check the fuel sender is properly grounded. If no fault found as above, a new sender may be
...fuel tank needs replacing however you may want to check that the electrical plugs are contacting properly,Check that the gauge is working by putting a piece of wire from the sender unit wire to the ...
171 questions posted
Usually answered in minutes!
479 Questions
102 Questions
89 Questions
65 Questions
16 Questions