2004 Mazda 3 "back headlights working" Questions

back lights headlights stay on no blinkers, i honk the horn and the wipers go on and headlights flash brake light stays ontimes the blinkers wont work. once i turned the high beams on and the blinkers

...back on. By shaking it it would turn on. It was annoying but doable. Eventually it stopped turning on completely. And now both headlights won't turn on. Anybody know why?! I was thinking ...

...back on. It has to be tight to protect the bulb from water. Then plug in the bulb. Replace the black plastic shield over the driver's side light. Finally, test the light. Replacing both headlights ...

...headlights on my 2007 Mazda3 went out at the same, why would this happen? Most likely a fuse, check the owners manual for location of fuse box (usually in the cabin ) to see if anything else runs ...

...headlights were facing the ground. I raised the hood and found the adjusting bolts, but they don't adjust anything. Is their any help or do I need to go to the dealership with this problem? the ...

...metal clip up to hold the bulb in place. Reattach the electrical cable and replace the round knob to the back of the headlight housing. Turn on the headlights to verify that they are in working

.all other lights work.. headlights will only work if I pull back on dimmer switch...I ALREADY DID REPLACE THE HEADLIGHT BULBS.. STILL NOTHING... HELP!! Replace the multi function switch in the column

back headlights My front headlights work on my ford focus, my back headlights don't work, my reverse, brake, and indicator lights all work fine. The lights on my dash i.e. petrol gage, speedometer don

...back on My headlights go out intermittently, whenever they feel like it, and won't turn back on without flipping the headlight knob back and forth several times. After not working for a while, they ...

...back on. Remove the Panel Cover bracket from the original headlight to the new Spyder Headlights as shown here. STEP: Install the Spyder turn signal socket if the orignal does not fit, unplug the ...