2003 Jeep Liberty "blend door actuator" Questions

Ad

Question about Jeep Liberty

1 Answer

2005 jeep liberty sport manual blend door acuator located The blend door actuator will not be the problem, the blend door will be stuck or broken, common problem.

Ad

Blend Air Door actuator probably caused it to break. The dash will have to be removed to replacethe door and the door actuator. YOU EITHER HAVE A PROBLEM WITH THE TEMPERTURE ACTUATOR OR LOW ON COOLANT

Ad

Question about Jeep Liberty

1 Answer

...blend door jeep liberty 2010 no heat My blend air door is stuck on my 2010 liberty. I have removed the actuator panel on the drivers side and the middle door that controls the air flow to the dash is ...

...blend door under the dash. Could be a faulty blend door actuator, or the main controller. You may need a shop manual to make the repairs since this is generally beyond the abilities of a DIY repair ...

Question about Jeep Liberty

1 Answer

...blend door. The actuator may be stuck or broken. The actuator opens and closes to adjust for the heat setting in the car. You might be able to take a coathanger and manually open the door if you can ...

...Blend door actuators could be bad, or vacuum leak in hoses. guess again? for sure dampers are not right only why remains. recirc door is vacuum. servo ops but not mode have you tried the mode door ...

...blend door actuator. If the calibration is not correct, the heating-A/C system may experience a condition where full heating or cooling capabilities cannot be obtained. Manual calibration of the ...

...door or blend door . This seems to be a common problem. Further inspection will be needed to verify which actuator and door is the problem. There is a Technical Service Bulletin with infomation and a ...

...it back and forth no change in air. bottom one seems to change air temp when u turn it. does this mean blend door is broke and how do I get at it ? The door is defective the shaft end is sheared

Blend door is not moving to open to the heater core. Coud be that the cable is not connected to the dash lever but if it's vacuum actuated the vacuum line could be off. Check that your getting vacuum

Not finding what you are looking for?
2003 Jeep Liberty Logo

1,191 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2002 Jeep Liberty
2002 Jeep Liberty

1,658 Questions

2005 Jeep Liberty
2005 Jeep Liberty

839 Questions

2004 Jeep Liberty
2004 Jeep Liberty

735 Questions

2006 Jeep Liberty
2006 Jeep Liberty

633 Questions

Top Jeep Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...