2003 Jeep Liberty "2 speed" Questions

...speed 2 use the speed 3 resistor to drop there voltage and speed three is not working as well my guess is the speed three resistor is burnt out in the device referred to as the blower motor resistor ...

...2 speed fan- it has a slower fan speed for aircon and a faster speed for engine cooling. Check the wiring on the fan- there should be a common earth, probably a black wire. The other two will need ...

speed.

but all techs, know there are 2 more, CRANK sensor.,and cam.
why not post the symptoms?????? FIRST so we can work from the SAME PAGE.
Or scan the PCM first. got P03xx DTC errors do

...speed gets full voltage) Dealership should have the replacement for $20 or less. Get the new one before you take the old one out so that you can see what it looks like, what to look for and how it ...

...Speed Actuator Speed sensor is faulty or has a bad connection. try clearing codes. 2 of 3 related to airfuel mixture and can be set off by gas cap challenge. if same codes come back diagnose ...

the accumulator cover and let the 2-3 accumulator dislodge out of the bore. Is this possible or what are your thoughts? scan it.check vechicle speed sensor.a bad speed sensor will cause shift problems

...the whole system needs to be scanned. on the old cars the TCM had its own 2 sensors (or 3) front ,middle, and tail. (tails was speed) this is now changed. the evolution is complex, so I'll skip

...speed 1 then 2 and then 3. After you make this test you will know that your fan is ok. You will just have to replace the plastic connector with new spades in it. You should see some evidence of over ...

...Speed sensor is below 60 RPM for 2.6 seconds . (too slow)! POSSIBLE CAUSES Check for park neutral codes Intermittent output speed sensor Output speed sensor defective Output speed sensor (+) open ...

...switch is set to high. Any ideas? There's 2 relays that control the blower motor, one runs low and medium speeds and the other runs the high speed. Replace the relay for the low and med