2002 Jeep Liberty "electric blend" Questions

...cool.Can you tell me why? blend door may not be changing from cold to hot could be a vacuum or electrical ...

...electric radiator fan isn't staying on, it pretty much has to be in the heater box. You may have a heater control valve on one of the hoses that go into the heater, but generally default on those is ...

...blend doors first. did you run the HVAC self tests yet. and last, check R134a pressure, per FSM. the pressure correct are from a chart of ambient and humidity if over charged, a/c will be weak. the ...

...duct (2). Remove the floor air outlet duct extension (1) from the floor duct (2) Disconnect the electrical connection at the blend door actuator (10). Blend door actuator and related components ...

...electric blend door actuator. Remove three retaining screws. Carefully pull electric blend door actuator outward and off A/C evaporator housing (19850) assembly. Installation Follow removal procedure ...

...steering column opening cover. Disconnect the in-vehicle temperature sensor aspirator hose and electrical connector. Position the instrument panel wire harness away from the LH temperature blend ...

...electric blend door actuator that controls positioning of the temperature blend door. Movement of the control knob (18519) from COOL (blue) to WARM (red) causes a corresponding movement on the air ...

...finish panel. Lower the glove compartment. Disconnect the RH temperature blend door actuator electrical connector. Remove the 3 RH temperature blend door actuator screws. Remove the RH ...

...with a wiring harness and a linkage arm. Disconnect the battery. Before beginning any work on the electrical system, disconnect the battery to avoid any electrical shorts or other accidents. Remove ...

to, to operate blend door all lines are good on the front of engine found hose off . does it go to the actuator/ blend door or back of engine The blend door under the dash has been electric since 1996