2002 Jeep Liberty "dodge dakota water pump removal" Questions

...Dodge Dakota cooling system. After the same tests and replacements you mentioned, the dealership replaced the radiator with a new radiator and the cooling problems disappeared. Apparently there was a ...

Dodge Dakota 6cyl 3.9liter w/ air? 1. Drain the cooling system. 2. Remove or disconnect the following: * Negative battery cable * Fan and clutch assembly from the pump * Fan shroud and fan assembly. *

...dodge dakota. 6cyl. thanx Tony. the fan nut is part of the fan,you need to unscrew the nut from the water pump to remove fan,this is harder to do if you don't have the special tools to do this job ...

Dodge Dakota Quad Cab 3.9L V-6 w/ cooling problems I have a 2000 Dodge Dakota Quad Cab 3.9L V-6 w/ A/C It is over heating what could be the problem It has a semi new water pump also new fan clutch and

...dodge dakota water pump pully is broke so i cant take off the shaft that holds the fan and fan clutch im just looking for sugestions somehow you need to grab a part of the pulley to prevent it from ...

do u have to pull the motor to change the water pump on a 1994 dodge dakota no you have to remove fan and fan clutch as well as the belts

...is the process of changing a water pump in a dodge dakota 3.9ltr pickup two wheel drive Thank you It must be taken in to be changed @.5 hour labor and removal of belts, your looking at about

...Dodge Dakota truck. Before removing the belt turn the nut counter clockwise. You may have hit the wrench with a hammer to loosen it. Because of limited space, the fan and shroud have to be removed at ...

...Dodge Dakota Have removed the seven bolts but the pump won't move Use a soft hammer and try tapping it lightly. If you try to pry it from the back, use something soft so you don't mar the surface and ...

...dodge dakota? Use a long screwdriver to pry between 2 of the bolts while you loosen another bolt with a box-end wrench. Don't take any bolts out until you have them all loose. Does this make