2002 Jeep Grand Cherokee "switch signal" Questions

Ad

Question about Jeep Grand Cherokee

3 Answers

...signal switch works ok , and it returns back to the normal position , but that tiking drives me crazy, it stops only when I apply breaks, and when I let the brakes off, it starts to make that sound. ...

Ad

Question about Jeep Grand Cherokee

1 Answer

signal switch ,same thing, Turn 4-way switch on&off signal starts working agian Had simular problem with wife 2000 Jeep Cherookee. My signal light were not working at all.Check flasher relay under

Ad

switch signal must be active before the shift lever can be moved out of the park position. The Shifter lever assembly receives two brake switch signals. The first signal is a CAN C Bus message sent to

...signal switch to a seperate switch added on the dash. It only works on high. But I know need to figure how to get the windshield washer motor to turn on. Is this an easy fix? or should I consider ...

Question about Jeep Grand Cherokee

1 Answer

...I would assume that if either of those items were the issue that both the hazard lights and the turn signals would not work. But they have different switches, right? Check the turn signal

Question about Jeep Grand Cherokee

2 Answers

...signal switch to be at fault, as all of the running lights, turn-signals, brake lights, and hazard lights are all ran through the turn-signal switch. You can also try stepping on the brake pedal and ...

Question about Jeep Grand Cherokee

1 Answer

...lights do not work The left and right signal switches works occasionally. How do I fix the problem? First check the fuse and relay for fault,and if they are good then the signal switch is

...signal switch. The turn signals and brake lights are wired together when you hit the brakes and use the left or right turn signal it should cancel out by using the turn signal switch. There is also a ...

Question about Jeep Grand Cherokee

3 Answers

...have a few ohms to ground when either the turn signal or hazard switch is on. From these tests and the diagram below, you can determine where the problem is. Report results if you need more

Question about Jeep Grand Cherokee

1 Answer

...signal voltage to switch low to 0 volts. 4.0LThe Camshaft Position Sensor (CMP) on the 4.0L 6cylinder engine is bolted to the top of the oil pump drive shaft assembly. The sensor and drive shaft ...

Not finding what you are looking for?
2002 Jeep Grand Cherokee Logo

3,525 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Jeep Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...