2001 Jeep Grand Cherokee "engine idle control valve location" Questions

...the or regularly take its time slowing down after you take your foot off the gas. An engine temp sensor can also cause a lingering high idle if it reports the engine as still being cold after warm

...idle while stopped. RPM fluctuates then engine eventually dies. 2001 Jeep Grand Cherokee shuts off at idle while stopped. RPM fluctuate\ up and down between 400-700 then engine eventually dies. It ...

Location of my IAC valve on my jeep what year what engine both matter idle air controllers , 1 or 2 of them based on years, engine./

...then check the Idle Air Control Valve. It is located on the side of the throttle body on the intake manifold. If it is plugged or otherwise inoperative, it will not allow the engine to idle

...idle and engine hesitation (and other problems), it is in most cases the idle speed control air-bypass valve and or throttle valve and upper intake, these area's get full of gunk and combustion ...

...idle and engine hesitation (and other problems), it is in most cases the idle speed control air-bypass valve and or throttle valve and upper intake, these area's get full of gunk and combustion ...

engine so it can start. So it has nothing to do with your problem...I would check for vacuum leaks at each and every vacuum hose. Then look at possible throttle position sensor and idle control valve.

engine stalls, you need to clean the Idle Air Control valve. This valve provides the engine with additional air anytime the throtle valve is clossed, such as when lifting your foot off the accelerator

...engine speed at idle. It will be mounted to the side of the throttle body. It will be round, usually silver, and have about 4 wires going to it. Newer jeeps will have whats called drive by wire. The ...

...be the problem? there is an EGR valve, its located on the intake manifold, it could be vacuum controlled, it should be closed at idle and open only when driving. do you have a check engine light