2001 Jeep Grand Cherokee "2000 wrangler dies starts" Questions

wrangler 2000 6 cylinder. A few week later it would kill while driving.  Change the normal things that would cause that to happen, the camshaft sensor,crankshaft sensor,idle position sensor.Still

2000 wrangler just died on me. The horn and lights work but no radio. Have no crank at all when trying to start Jeep started. Moved it across the street that's when it died suddenly The horn ...

2000 jeep wrangler - starts and then will die while driving. Battery replaced, starter replaced, alternator checks out okay. Could it be the solenoid? The solenoid causes the starter to engage when ...

THE PROBLEM IS WHEN YOU HIT A BUMP IT BLOWS THE #12 FUSE AND DIES REPLACE THE FUSE AND IT WILL START u have wires shorting together when the vehicle is shook that needs to be sorted now or it could ...

...2000 Jeep wrangler it starts fine and drives off....it dies randomly and won't start back after about 10 minutes fires right back up. ??? any ideas as to what is wrong with it. Just bought a 2000 ...

...2000 wrangler 2.5 Petrol low mileage has always worked great recently it has started to either try and cut out with complete loss of power or die completely. Normally it will start straight up again ...

...Wrangler 2.5 Starts fine but won't idle until operating temp is reached , I have to keep it at 2000 RPM or it will just die . I also noticed if the air temp is above 60 degrees it will start just ...

...Wrangler 4.0 idles too high in park. When I first crank my jeep engine speed jumps to 2000 rpm then slowly goes down to 1000. It does not matter if engine is warm or cold. Also my temp. control on my ...

...2000 Jeep Wrangler. We have a new battery, alternator checked okay, new starter. The jeep starts, lights come on, and then will die while driving. What could be draining the battery? Thanks so much. ...

...2000 jeep wrangler 4.0 engine it ran good for 16 miles then would quit no check engine light on so i scanned it anyway came up with a p 1391 mis fire so i changed can sensor ran good about 30 minutes ...