2001 Jeep Cherokee "remove tailgate bezel" Questions

...tailgate windshield washer does not work I believe that the switch is the problem so I purchased a switch that operates the rear windshield washer fluid. My question is how do you remove the old ...

...from both sides inward and the tailgate should open. Remove the 3 large star shaped screws------------------------------------------------------------------------------------------- Tacho Pro ...

remove the tailgate handle to install a new bezel? YES I THINK IF YOU LOWER TAILGATE YOU WILL SEE BOLTS REMOVE AND TAILGATE RELEASE HANDLE WILL COME OUT TWO PLASTIC CLIPS HOLD RODS ON LEVER REMOVE FOR

tailgate inner panel. - Remove the rear wiper motor and mounting bracket from the tailgate as a unit. 1 - BEZEL AND GASKET 2 - OUTPUT SHAFT 3 - TAILGATE OUTER PANEL 4 - NUT 5 - NUT COVER What you will

...the two mounting screws from the keyed slots in the top of the tailgate inner panel. Remove the rear wiper motor and mounting bracket from the tailgate as a unit. To Install just reverse ...

...to the tailgate. Remove these bolts and the handle will pull forward exposing the rods that pull together to release the locks. Chances are the handle assembly is broken and will need ...

...easy to break. once this is removed,you;ll be able to see the rods connected to the handle. It also helps to remove the 2 screws on each side of the tailgate,and remove the latches. Hope this

...clip. it is a plastic clip that locks on rod insert new one in handle then install rod and snap clip down. to gain access you will have to remove tailgate bezel and these usually break when

...tailgate door liner panel on a 2005 Suzuki Grand Vitara JB?? There is no inner door latch to be removed. We cannot open the rear door as outer handle has broken. Help....many thx The top bezel pops ...

...tailgate, remove handle bezel. The bottom is held on with two plastic "Fir tree" pins. 4. Open taligate, remove the three remaining torx bolts, close tailgate. 5. Observe that there are two plastic ...